- Full and partial rewiring
- Showers / immersion heaters
- Garden Electrics
- Energy saving advice and products
- Breakdown and emergency repairs
- Inspection and certification
- CCTV including real time DVR recording and remote access
- Computer suites
- Design & Build
- Switch room replacements
- Shops / Offices
- Landlords Periodic Testing & Inspections
- Computer cabling
- Railway Arch refurbishments
- Tenanted properties with the London Underground Refurbishment
UKPN Service and Upgrades
Due to the increasing number of locations where new properties are being installed and are without electricity, Brindle Installations can be your one stop shop. We have vast experience in carrying out all paperwork from the initial application to the completion of your new electrical service. We can carry out all excavation works (see photographs). Arrange for the new / upgraded supplies to be installed. We work very closely with UKPN and are fully aware of what is required.
The majority of our customers either require the service head to be relocated or upgraded from single to three phase, either way we can be on hand to help. As you can see in the photographs, the excavation works shown are in highly built up and congested areas within central London, these are probably the more complicated installations.
Electrical Installation Condition Reports
Electrical installation condition reports in accordance with BS 7671 17th Edition Wiring Regulations are available for domestic, commercial and industrial properties
All installations should be checked on a regular basis, the harsher the environment the level between intervals should be increased. Domestic properties should be tested at a maximum of ten years, but we often find these are never carried out. If you are in the process of purchasing a property we would strongly advise that you arrange for an Electrical Installation Condition Report to be obtained prior to the purchase.
Always obtain several quotes for this as prices vary considerably, the purpose of the report is to obtain enough information of the condition and recommendations on the fixed wiring, most house holder’s go for the cheapest quote, but we have found that the companies offering the cheapest prices do not thoroughly test the entire installation but only carry out the easy parts.
The purpose of the test is to ensure that the property you live in, rent out or intend to purchase is safe, by saving a few pounds in the first instance could cost you a whole lot more in the long run in terms of money and safety.
Remember the golden rule; Cheap, fast, good.
- Install quickly and to a high standard, but then it will not be cheap.
- Install something quickly and cheaply, but it will not be of high quality.
- Install something with high quality and cheaply, but it will take a relatively long time.
Fault Finding Guide
In the event of a trip occurring on an RCD it is most likely to be caused by a fault in a piece of equipment supplied by a socket-outlet.
The flow chart below gives a simple guide to actions to be taken to identify the source of the fault. If in doubt telephone 07860 937 938.